Natural White ePLA 3D Printer Filament
£38.99 Ex. VAT
Discontinued, stock available until exhausted
- Premium PLA 3D Printer filament
- Recycled material: 50% (ISO 14021)
- 100% recyclable cardboard spool and packaging
- 750g of material
Product print image by @3dmakernoob
Interested in 2.85mm 750g spools? Our partner 3DGBIRE stock our full range - click here to view
ePLA 750g - Natural White 3D Printer Filament
An engineering-grade PLA filament, with performance comparable to ABS. Features a heat resistance of 95°C< (after annealing) and the ability to print at speeds up to 120mm/s. ePLA gives a semi-matte finish.
Annealing Instructions:
- Preheat a convection oven to 110°C / 230°F
- When the oven is preheated, quickly put your printed object (tip: Keep the supports attached) in the oven and start a timer.
- We recommend placing the object on a flat aluminium sheet or similar.
- For small objects with thin walls & medium infill set a 20-minute timer.
- For large objects with thick walls & medium infill set a 60-minute timer.
- When the object is done annealing, do NOT remove the object, but instead just turn off the oven.
- Wait for the oven to cool down to room temperature.
- Remove the object from the oven (remove the supports).
Please note:
- A higher infill percentage = less shrinkage during annealing
- During the annealing process the already high crystalline ePLA material will (rapidly) crystallise further – this means that ePLA will become extra stiff at high temperatures.
- The material has been developed for dimensional accuracy both before and after annealing which explains the low shrinkage that you will experience when working with ePLA
Tips
Recommended printing temperature (°C): 235 ± 10
Recommended heated bed temperature: Can be printed without, but if you have one, we recommend 70°C
Storage: Cool and dry conditions, ideally ~20°C
Downloads
Additional information
Weight | 1.1 kg |
---|---|
diameter | 1.75mm, 2.85mm |
colour/diameter | |
size | |
weight |
Steven Pearson –
I’ve just started using the Filamentive ePLA and i’m really impressed! It’s much stronger than standard PLA and very easy to print. It’s quite matt also which hides the layers really well. My prints have been at 200 microns and you can barely see them. This could be my new favourite filament.
Nigel Ratcliffe (verified owner) –
I tried this on my Qidi X-Pro at 0.05mm layer height, and WOW ! Amazing results. It’s very strong, and has a beautiful smooth satin/ matte finish. Layer lines are almost invisible. It’s super easy to print, is a good price and has amazing qualities. I’ll be getting more of this lovely natural colour soon, and also will get the black to try. This filament has really amazed me !
Steve E. (verified owner) –
United Kingdom
Asked Customer support for information on annealing. Still waiting for a response