ONE PET 750g Natural Transparent 3D Printer Filament – 2.85mm

ONE PET 750g - Natural Transparent 3D Printer Filament

Interested in 2.85mm 750g spools? Our partner 3DGBIRE stock our full range - click here to view

WASTESTREAM TO MAINSTREAM!

ONE PET is a 100% recycled filament made from post-consumer PET plastic bottle waste. This is a stiff and tough material with excellent interlayer adhesion, available in a wide range of colours to suit needs and requirements.

Where our regular PETg has a better impact resistance, ONE PET boasts superior technical properties such as tensile strength, elongation strain at break and tensile modulus.

Please note: PET filaments such as ONE PET are inherently more hygroscopic than other materials - therefore please ensure you keep it dry. Should you need to dehydrate ONE PET we recommend oven-drying at 65° for 24 hours.

Settings

1.75mm settings (based on Prusa i3 MK 2)                                                         

Extrusion Multiplier: 1.03

Extrusion Width: 0.36

Retraction Distance: 1mm

Layer Height: 0.2

Top Layers: 4

Bottom Layers: 4

Outline: 2

Infill: 20%

Internal Fill Pattern: Grid

Extruder Temp.: 260°

Heated bed: 70°

Fan Speed: 0% (Top layers should have 100% of fan speed)

Nozzle diameter: 0.4mm

2.85mm settings (based on Ultimaker 2+)

Flow: 103%

Extrusion Width: 0.35

Retraction Distance: 1mm

Layer Height: 0.2

Top Layers: 4

Bottom Layers: 4

Wall line count: 2

Infill: 20%

Internal Fill Pattern: Grid

Extruder Temp.: 260°

Heated bed: 70°

Fan Speed: 0% (Top layers should have 100% of fan speed)

Speed: 50 mm/s

Nozzle diameter: 0.4mm

Downloads

• Technical Data Sheet (TDS)
• Material Safety Data Sheet (MSDS)