White PLA 3D Printer Filament

(10 customer reviews)

£23.99£29.99 Incl. VAT



  • High quality PLA 3D Printer filament
  • Recycled content: 55% (2019 average of all colours of this material; can vary)
  • 100% recyclable cardboard spool and packaging
  • Colour ref – 9003(Default = RAL, Numbers with a ‘C’ on the end refer to Pantone)
or 3 interest-free instalments by
SKU: N/A Category:

Product print images by Make Architects

PLA 3D Printer Filament - White

Recycled origin. Unrivalled quality.

We also offer rPLA white in a large 2.3 kg spool - click here to view

PLA; the staple of desktop 3D printing. Short for polylactic acid, PLA is a bioplastic derived from plant-based sources, meaning it is more environmentally friendly compared to ABS, for example. However, PLA production is depleting natural resources faster that they can be replenished. To address this issue, we have pioneered rPLA 3D printer filament, still boasting the same great PLA features such as; low warping, limited smell and premium print quality – but with the added benefit of being produced from factory waste streams as opposed to virgin pellets. All users of rPLA can feel good about reducing the demand for natural resources and therefore saving the environment, whilst being confident that the print quality will still be one of the best on the market! The go-to filament for all 3D printer owners, perfect consumer products, toys and general prototypes.

*PLEASE NOTE - 300g spools are intended as sample spools for testing purposes and may not give a true representation of colour*


Recommended printing temperature: 190-220°C

Recommended heated bed temperature: Can be printed without, but if you have one, we recommend 50-60°C

Storage: Cool and dry conditions, ideally ~20°C



Additional information

Weight 1.4 kg

1.75mm, 2.85mm


1KG, 750g, 300g

10 reviews for White PLA 3D Printer Filament

  1. Alex Gibson

    Printed very nicely on several printers including MakerBot Replicator 2 (very fussy, prone to jamming on bad quality filament) and Creality CR-10. I printed at 230 degrees on both without issue. Results are consistent and overall impression is of a ‘premium’ filament, so I’m delighted this is possible with recycled material.

  2. Stuart Dransfield (verified owner)

    I have printed over 20kg of the white and I love it, always consistent, never a problem with blockages. I print on a Prusa i3MK2 with a bed temp of 50 and nozzle at 205 first layer and 203 for all others.Great value superb quality filament.

  3. Matthew

    This is fantastic stuff to print with, we have our printers running nearly 24/7 and print about 10kg a month. We count on Filamentive PLA becuase its so reliable and the parts come out absolutely perfect.

  4. Will (verified owner)

    I have printed about 500g of filament so far, the prints have come out nicely with a good surface finish and great layer adhesion. The larger reel size is nice, and it is nice that the card spools are recyclable.

  5. Josef Dunne (verified owner)

    We’ve been using Filamentive material for a while now. The rPLA gives of a bright white and is very easy to print and prints very well! Love the very strong cardboard filament holders too, very good for the environment.

  6. Chung Chu (verified owner)

    Verified reviewVerified review - view originalExternal link | gbScotland, United Kingdom

    Prints well, minimal stringing.

  7. Anna Lucia Masi (verified owner)

    Verified reviewVerified review - view originalExternal link | gbEngland, United Kingdom

  8. Ian C. (verified owner)

    Verified reviewVerified review - view originalExternal link | gbEngland, United Kingdom

  9. David Fenton (verified owner)

    Verified reviewVerified review - view originalExternal link | gbEngland, United Kingdom

    My first time with this filament. I wanted to buy British, and try and use some with recycled content. This filament does both. No problems with printing. Lower temperatures for the bed (60) and the nozzle (200) solved the problems I had with warping on my “Printbite” surface. Finish is as good if not better than other standard PLA. I will be using this as my default PLA filament in the future and will certainly be trying their PETG when I next need some

  10. Colin H. (verified owner)

    Verified reviewVerified review - view originalExternal link | gbEngland, United Kingdom

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.