Natural Transparent PLA 3D Printer Filament
£21.99 – £26.99 Ex. VAT
- Premium PLA 3D Printer filament
- Recycled material: 87% (ISO 14021)
- 100% recyclable cardboard spool and packaging
PLA 3D Printer Filament - Natural Transparent
Recycled origin. Unrivalled quality.
PLA; the staple of desktop 3D printing. Short for polylactic acid, PLA is a bioplastic derived from plant-based sources, meaning it is more environmentally friendly compared to ABS, for example. However, PLA production is depleting natural resources faster that they can be replenished. To address this issue, we have pioneered rPLA 3D printer filament, still boasting the same great PLA features such as; low warping, limited smell and premium print quality – but with the added benefit of being produced from factory waste streams as opposed to virgin pellets. All users of rPLA can feel good about reducing the demand for natural resources and therefore saving the environment, whilst being confident that the print quality will still be one of the best on the market! The go-to filament for all 3D printer owners, perfect consumer products, toys and general prototypes.
Tips
Recommended printing temperature: 190-220°C
Recommended heated bed temperature: Can be printed without, but if you have one, we recommend 50-60°C
Storage: Cool and dry conditions, ideally ~20°C
Downloads
https://www.youtube.com/watch?v=eud12gTD6NE
Additional information
| Weight | 1.4 kg |
|---|---|
| diameter | 1.75mm, 2.85mm |
| colour/diameter | |
| size | |
| weight | 1KG, 750g |
milks (verified owner) –
Having printed with countless PLAs over the years I can confidently say this is one of the best. It has excellent finish and clarity and reliably produces strong, accurate prints. My new go-to filament.
jannetta (verified owner) –
I am more than pleased. I received this filament yesterday and printed with it for the first time last night. It’s the first time I printed with clear filament and was a bit worried at the start because I could hardly see the filament let alone determine whether it was sticking to the plate. I printed two first layer calibrations test before starting and that was the total amount of wastage (some fraction of a gramme). I then printed the part I needed and it is absolutely beautiful. I would have uploaded a picture if it was possible because I’m so pleased I just want to show it to somebody 🙂
Colin H. (verified owner) –
Joel Saldeck (verified owner) –
Matteo C. (verified owner) –
Filament looks great, low stringing and good adhesion
Anonymous (verified owner) –
Verified Buyer (verified owner) –