Grey PLA Cosmic 3D Printer Filament
£24.99 Ex. VAT
- Premium PLA 3D Printer filament
- Featuring non-toxic metallic flakes – For that extra sparkle
- 100% recyclable cardboard spool and packaging
- 750g of material
- Colour ref – 432 C(Default = RAL, Numbers with a ‘C’ on the end refer to Pantone)
Product print images by: @FilamentFrenzy (Catwoman), @3dmakernoob (Stag)
Interested in 2.85mm 750g spools? Our partner 3DGBIRE stock our full range - click here to view
Reach for the stars with rPLA Cosmic - Grey (750g)
Our highly-rated PLA, now featuring metallic flakes to create prints that are "out of this world"
PLA; the staple of desktop 3D printing. Short for polylactic acid, PLA is a bioplastic derived from plant-based sources, meaning it is more environmentally friendly compared to ABS, for example. However, PLA production is depleting natural resources faster that they can be replenished. To address this issue, we have pioneered rPLA 3D printer filament, still boasting the same great PLA features such as; low warping, limited smell and premium print quality – but with the added benefit of being produced from factory waste streams as opposed to virgin pellets. All users of rPLA can feel good about reducing the demand for natural resources and therefore saving the environment, whilst being confident that the print quality will still be one of the best on the market! The go-to filament for all 3D printer owners, perfect consumer products, toys and general prototypes.
Tips
Recommended printing temperature: 205-225°C
Recommended heated bed temperature: Can be printed without, but if you have one, we recommend 50-60°C
Storage: Cool and dry conditions, ideally ~20°C
Downloads
Additional information
| Weight | 1 kg |
|---|---|
| diameter | 1.75mm, 2.85mm |
| colour/diameter | |
| size | |
| weight |
milks (verified owner) –
Leaves a nice shimmering effect that catches the light, especially across multi-faceted surfaces. It also seems to hide layer lines well even at 200 microns. A very nice filament that’s easy to work with.
kr15_uk –
Absolutely beautiful material to print with, see for yourself – done at 0.3 layer height. Have to mention – in my case I had to print it at 180c with Revo where most PLA goes at 200-210