Grey PLA 3D Printer Filament
£21.99 – £26.99 Ex. VAT
- Premium PLA 3D Printer filament
- Recycled material: 87% (ISO 14021)
- 100% recyclable cardboard spool and packaging
- Colour ref – 7011(Default = RAL, Numbers with a ‘C’ on the end refer to Pantone)
ALSO AVAILABLE:
Product print image by Galaxy3D
Interested in 2.85mm 750g spools? Our partner 3DGBIRE stock our full range - click here to view
PLA 3D Printer Filament - Grey
Recycled origin. Unrivalled quality.
PLA; the staple of desktop 3D printing. Short for polylactic acid, PLA is a bioplastic derived from plant-based sources, meaning it is more environmentally friendly compared to ABS, for example. However, PLA production is depleting natural resources faster that they can be replenished. To address this issue, we have pioneered rPLA 3D printer filament, still boasting the same great PLA features such as; low warping, limited smell and premium print quality – but with the added benefit of being produced from factory waste streams as opposed to virgin pellets. All users of rPLA can feel good about reducing the demand for natural resources and therefore saving the environment, whilst being confident that the print quality will still be one of the best on the market! The go-to filament for all 3D printer owners, perfect consumer products, toys and general prototypes.
Tips
Recommended printing temperature: 190-220°C
Recommended heated bed temperature: Can be printed without, but if you have one, we recommend 50-60°C
Storage: Cool and dry conditions, ideally ~20°C
Downloads
https://www.youtube.com/watch?v=eud12gTD6NE
Additional information
| Weight | 1.4 kg |
|---|---|
| diameter | 1.75mm, 2.85mm |
| colour/diameter | |
| size | |
| weight | 1KG, 750g |
Mark A. (verified owner) –
This filament is just consistent, which you really want in a product – I know that any issues are from the printer side and not the filament.
Great stuff
Colin H. (verified owner) –
lunia3d –
Fantastic material and colour. Prints wonderfully!
George FARRINGTON (verified owner) –
Great material from a great supplier
Adam Boxall (verified owner) –
Great PLA to work with, easy to print and gives great results, will be buying this for a long time!
Mark A. (verified owner) –
This grey is my go to filament for all my mass produced prints, it is reliable – dry, no tangles, great finish – it just works!
The added bonus is that the spoils are recyclable so I’m not adding to the amount of plastic waste (apart from my supports!)
Amir Z. (verified owner) –
++++
Mark E. (verified owner) –
Printed a few parts on a couple of systems, what can I say all good, nice surface finish and cheaper than most!
Anonymous (verified owner) –
Mike Cargill (verified owner) –
This is being used for buggy parts. Good quality finish, recyclable spools and recycled pla content are all reasons to use.
Richard H. (verified owner) –
Steve Hampshire (verified owner) –
Lucien DeSilver (verified owner) –
Anonymous (verified owner) –
David Shearer (verified owner) –