Orange PLA 3D Printer Filament
£21.99 – £26.99 Ex. VAT
Product print image by @FilamentFrenzy
Interested in 2.85mm 750g spools? Our partner 3DGBIRE stock our full range - click here to view
PLA 3D Printer Filament - Orange
Recycled origin. Unrivalled quality.
PLA; the staple of desktop 3D printing. Short for polylactic acid, PLA is a bioplastic derived from plant-based sources, meaning it is more environmentally friendly compared to ABS, for example. However, PLA production is depleting natural resources faster that they can be replenished. To address this issue, we have pioneered rPLA 3D printer filament, still boasting the same great PLA features such as; low warping, limited smell and premium print quality – but with the added benefit of being produced from factory waste streams as opposed to virgin pellets. All users of rPLA can feel good about reducing the demand for natural resources and therefore saving the environment, whilst being confident that the print quality will still be one of the best on the market! The go-to filament for all 3D printer owners, perfect consumer products, toys and general prototypes.
Tips
Recommended printing temperature: 190-220°C
Recommended heated bed temperature: Can be printed without, but if you have one, we recommend 50-60°C
Storage: Cool and dry conditions, ideally ~20°C
Downloads
https://www.youtube.com/watch?v=eud12gTD6NE
Additional information
| Weight | 1.4 kg |
|---|---|
| diameter | 1.75mm, 2.85mm |
| colour/diameter | |
| size | |
| weight | 1KG, 750g |
Mike McMordie (verified owner) –
Exceptionally easy to print with. Did an XYZ calibration cube as a test print and it came out perfectly first time. 195C printhead, 60c bed for first layer.
Highly recommended.
Kenneth Kennedy (verified owner) –
I have no regrets in ordering, the pla drum is perfect, recyclable and out put the extruder nice and evenly, no springing from the drum, and all the prints have been good, and will definitely order again.
Judith R. (verified owner) –
Brilliant service, so very easy to deal with. I’m a returning customer and I’ll be back!
Anonymous (verified owner) –
Ian Murphy (verified owner) –
no issues at all, likes to print hot. will be ordering more
Vincent H. (verified owner) –
The usual excellent quality of filament but the spool was just a little too wide for my filament drier and jammed during a print. I just repeated the print with the filament outside of the drier so not a show stopper by any means, this is not an issue that I’ve had before so is likely a one off but I thought it was worth a mention.
Richard H. (verified owner) –