Red PLA 3D Printer Filament
£21.99 – £26.99 Ex. VAT
Product print images by @FilamentFrenzy
Interested in 2.85mm 750g spools? Our partner 3DGBIRE stock our full range - click here to view
PLA 3D Printer Filament - Red
Recycled origin. Unrivalled quality.
PLA; the staple of desktop 3D printing. Short for polylactic acid, PLA is a bioplastic derived from plant-based sources, meaning it is more environmentally friendly compared to ABS, for example. However, PLA production is depleting natural resources faster that they can be replenished. To address this issue, we have pioneered rPLA 3D printer filament, still boasting the same great PLA features such as; low warping, limited smell and premium print quality – but with the added benefit of being produced from factory waste streams as opposed to virgin pellets. All users of rPLA can feel good about reducing the demand for natural resources and therefore saving the environment, whilst being confident that the print quality will still be one of the best on the market! The go-to filament for all 3D printer owners, perfect consumer products, toys and general prototypes.
Tips
Recommended printing temperature: 190-220°C
Recommended heated bed temperature: Can be printed without, but if you have one, we recommend 50-60°C
Storage: Cool and dry conditions, ideally ~20°C
Downloads
https://www.youtube.com/watch?v=eud12gTD6NE
Additional information
Weight | 1.4 kg |
---|---|
diameter | 1.75mm, 2.85mm |
colour/diameter | |
size | |
weight | 1KG, 750g |
Meady638 (verified owner) –
Amazing filament, great quality and the finish is consistent. Best filament brand I’ve ever used. Won’t go anywhere else.
Matthew Mead
Paul D (verified owner) –
Cant complain. Differences between this and cheap £8 filament I use are huge
Sticks great to the bed without any adhesive aids at all
Can be run at much lower temps than cheap stuff
Heated bed can be run at much lower temps without it warping
biggest bonus with this ive found is absolutely no stringing anywhere.
You get what you pay for, simple as!
etgabo (verified owner) –
very satisfied with this. can pretty much max out the print speed my ender 3 is capable of (it has a creality dd extruder with stock ptfe lined hotend and a glass bed but everyting else is stock) and still getting very good prints.
James Kershaw (verified owner) –
Red was the perfect type of red I use.
On a cardboard roll aswell which the amount of filament I use is great addition
Anonymous (verified owner) –
Richard (verified owner) –
I must remember that the 1KG spools don’t fit in the Bambu Lab AMS without re-spooling.
Peter Edwards (verified owner) –
Prints well